Scientists make printer that needs no ink, only water


Scientists have created a printer that uses just water to print instead of ink. After about 22 hours, the paper fades back to a plain sheet of white paper, allowing it to be reused. A group of chemists assert that the “water-jet” technology, that is capable of reprinting numerous times, spares people their money and saves trees.
"Several international statistics indicate that about 40 percent of office prints [are] taken to the waste paper basket after a single reading," Sean Xiao-An Zhang, a chemistry professor at Jilin University in China, who supervised the work, said. The paper alone is not ordinary at all, as it is coated with an invisible dye that shows color when water hits it. Later on, the print slowly fades away within a matter of 22 hours, but disappears much faster if exposed to high levels of heat. According to the designers, the print comes out clear and the technology is not expensive at all. "Based on 50 times of rewriting, the cost is only about 1 percent of the inkjet prints," Zhang said in a video. If one page were reused just 12 times, the cost would only be one-seventeenth that of its inkjet counterpart. Zhang said dye-treating the paper, of the type generally used for printing, added about five percent to its price, but this is more than compensated for by the saving on ink. There is no need to change the printer, but the ink cartridge needs to be filled up with water with the help of a syringe. "Water is a renewable resource and obviously poses no risk to the environment," said the study. In the past, such ventures using disappearing ink gave way to low-contrast results at a high price, with some methods using questionable chemicals. Oxazolidine, a dye compound, is the type of mix Zhang and his group used to print off the paper, with clear blue showing in less than one second after the water was put on the page. Four water colors can be printed for the time being, which are blue, magenta, gold, and purple. However, only one color can be printed off at a time. The team hopes to make the resolution and duration time for printing better. Zhang said the dyed paper was "very safe" but toxicity tests are underway on mice to be sure. Voice of Russia, The Sydney Morning Herald Source: http://sputniknews.com/
Read More........

Researchers Teach Machines To Learn Like Humans


A team of scientists has developed an algorithm that captures our learning abilities, enabling computers to recognize and draw simple visual concepts that are mostly indistinguishable from those created by humans. The work, which appears in the latest issue of the journal Science, marks a significant advance in the field -- one that dramatically shortens the time it takes computers to 'learn' new concepts and broadens their application to more creative tasks. A team of scientists has developed an algorithm that captures our learning abilities, enabling computers to recognize and draw simple visual concepts that are mostly indistinguishable from those created by humans. "Our results show that by reverse engineering how people think about a problem, we can develop better algorithms," explains Brenden Lake, a Moore-Sloan Data Science Fellow at New York University and the paper's lead author. "Moreover, this work points to promising methods to narrow the gap for other machine learning tasks." The paper's other authors were Ruslan Salakhutdinov, an assistant professor of Computer Science at the University of Toronto, and Joshua Tenenbaum, a professor at MIT in the Department of Brain and Cognitive Sciences and the Center for Brains, Minds and Machines. When humans are exposed to a new concept -- such as new piece of kitchen equipment, a new dance move, or a new letter in an unfamiliar alphabet -- they often need only a few examples to understand its make-up and recognize new instances. While machines can now replicate some pattern-recognition tasks previously done only by humans -- ATMs reading the numbers written on a check, for instance -- machines typically need to be given hundreds or thousands of examples to perform with similar accuracy. "It has been very difficult to build machines that require as little data as humans when learning a new concept," observes Salakhutdinov. "Replicating these abilities is an exciting area of research connecting machine learning, statistics, computer vision, and cognitive science." Salakhutdinov helped to launch recent interest in learning with 'deep neural networks,' in a paper published in Science almost 10 years ago with his doctoral advisor Geoffrey Hinton. Their algorithm learned the structure of 10 handwritten character concepts -- the digits 0-9 -- from 6,000 examples each, or a total of 60,000 training examples. In the work appearing in Science this week, the researchers sought to shorten the learning process and make it more akin to the way humans acquire and apply new knowledge -- i.e., learning from a small number of examples and performing a range of tasks, such as generating new examples of a concept or generating whole new concepts. To do so, they developed a 'Bayesian Program Learning' (BPL) framework, where concepts are represented as simple computer programs. For instance, the letter 'A' is represented by computer code -- resembling the work of a computer programmer -- that generates examples of that letter when the code is run. Yet no programmer is required during the learning process: the algorithm programs itself by constructing code to produce the letter it sees. Also, unlike standard computer programs that produce the same output every time they run, these probabilistic programs produce different outputs at each execution. This allows them to capture the way instances of a concept vary, such as the differences between how two people draw the letter 'A.' While standard pattern recognition algorithms represent concepts as configurations of pixels or collections of features, the BPL approach learns "generative models" of processes in the world, making learning a matter of 'model building' or 'explaining' the data provided to the algorithm. In the case of writing and recognizing letters, BPL is designed to capture both the causal and compositional properties of real-world processes, allowing the algorithm to use data more efficiently. The model also "learns to learn" by using knowledge from previous concepts to speed learning on new concepts -- e.g., using knowledge of the Latin alphabet to learn letters in the Greek alphabet. The authors applied their model to over 1,600 types of handwritten characters in 50 of the world's writing systems, including Sanskrit, Tibetan, Gujarati, Glagolitic -- and even invented characters such as those from the television series Futurama. In addition to testing the algorithm's ability to recognize new instances of a concept, the authors asked both humans and computers to reproduce a series of handwritten characters after being shown a single example of each character, or in some cases, to create new characters in the style of those it had been shown. The scientists then compared the outputs from both humans and machines through 'visual Turing tests.' Here, human judges were given paired examples of both the human and machine output, along with the original prompt, and asked to identify which of the symbols were produced by the computer. While judges' correct responses varied across characters, for each visual Turing test, fewer than 25 percent of judges performed significantly better than chance in assessing whether a machine or a human produced a given set of symbols. "Before they get to kindergarten, children learn to recognize new concepts from just a single example, and can even imagine new examples they haven't seen," notes Tenenbaum. "I've wanted to build models of these remarkable abilities since my own doctoral work in the late nineties. We are still far from building machines as smart as a human child, but this is the first time we have had a machine able to learn and use a large class of real-world concepts -- even simple visual concepts such as handwritten characters -- in ways that are hard to tell apart from humans."Contacts and sources:James Devitt, New York University Source: http://www.ineffableisland.com/Image: https://pixabay.com/, under Creative Commons CC0
Read More........

Now, a solar-toilet to turn human waste into power


The researchers plan to collect the hydrogen in a fuel cell to power a light or possibly even a self-cleaning mechanism, New Scientist reported.(Reuters) 
A scientist, who has been experimenting with solar-powered water treatment on a small scale, is now planning to incorporate the technology into a portable toilet. Michael Hoffmann at the California Institute of Technology found that sunlight powers an electrochemical reaction with human waste in water that generates microbe-killing oxidants and releases hydrogen gas. The researchers plan to collect the hydrogen in a fuel cell to power a light or possibly even a self-cleaning mechanism, New Scientist reported. Hoffmann received a grant this week from the Bill and Melinda Gates Foundation to build a prototype. He says he can build one toilet for 2000 dollars and hopes to reduce the cost through design refinement and mass production.The grant is part of the Gates Foundation's latest global public health initiative to improve sanitation. Source: Indian Express
Read More........

Smart Electric Vehicle Balances on Two Wheels


San Francisco startup Lit Motors has created the C1, a two-wheel, self-balancing electric vehicle that brings the benefits of a motorcycle together with the safety and comfort of a car, according to founder and CTO Danny Kim. After speaking on stage at GreenBiz's Verge conference event just blocks from his Lit Motors Lab, he invited Intel Free Press to his warehouse to talk about the technology his team is building into the C1. To make the C1 affordable, appealing, safe and perform optimally, Kim turned to technologies such as computer aided design, stabilization mechanisms and embedded computer systems tied to sensors functioning somewhat like the sensors found under the hood of Android and Apple smartphones, says Kim. At the core of C1 are two 40-kilowatt electric motors and nestled beneath the driver seat are a set of heavy, fast-spinning gyroscopes, similar to the positioning and orientation technology used in the International Space Station and many satellites. These gyros put out 1,300-foot pounds of torque, providing enough balancing power "that it would take a baby elephant to knock it over," said Kim. In addition to the frame, body and battery recharging system there's an intricate nervous system spread throughout the vehicle that collects data and returns instructions processed by two Intel Core i7 desktop computer chips. This is what turns the motorcycle into a robot. "There are servos, gyro and traction motors, inertia and infra red sensors, temperature and heat sensors, really a myriad of sensors that all feed data to be processed," said Kim. "Through that process, a command goes to the gryos to tilt and lean the vehicle to keep it balanced or to lean into a turn -- it's all heavily based on the computer processing system." 
Read More........

The peculiar 3D model which allows parents to hold their baby... BEFORE it's even born

Expectant parents in Japan who can't wait to show the world what their baby will look like can now buy a 3D model of the foetus
Expectant parents who cannot wait to hold their new child can now buy a three-dimensional model of the foetus to cradle and show friends. Japanese inventors have devised a way to transform the commonplace ultrasound scan into an anatomically correct resin replica for parents to handle and keep as a memento. The nine-centimetre (3.6-inch) resin model of the white foetus, encased in a transparent block in the shape of the mother's body, is fashioned by a 3D printer after an MRI scan. FASOTEC, the company offering the 'Shape of an Angel' model, even offers parents a miniature version which could be a 'nice adornment to a mobile phone strap or key chain.' Tomohiro Kinoshita, of FASOTEC, said: 'As it is only once in a lifetime that you are pregnant with that child, we received requests for these kind of models from pregnant women who... do not want to forget the feelings and experience of that time.' The 'Shape of an
3D model of their unborn child's face
Angel' costs 100,000 yen (or around £760), and the company said the ideal time for a scan is around eight or nine months into the pregnancy. For those who would like a less pricey version, the company will start offering a 3D model of the face of the foetus at 50,000 yen - £380 - in December. It will use ultrasound images taken at a medical clinic in Tokyo that has forged a tie-up with the company. FASOTEC, originally a supplier of devices including 3D printers, uses a layering technique to build up three-dimensional structures. The company also produces 3D models of internal organs that can be used by doctors to plan surgery or by medical students for training, a spokesman said. It is also possible that models can be used in hospitals to better inform patients what their problems are, instead of relying on difficult-to-understand diagrams. The technology 'realises not only the form but also texture of the model -- for example making it hard or soft', the firm said . 'By making a model that is similar to a real organ or bone, one can simulate operations and practise different surgical techniques.' Kinoshita said the company hit upon the idea of making 3D models of unborn babies in the hope that people would become more aware of the technology. But there are medical benefits too. The company said some medics could also foresee diagnostic possibilities with the models that may help predict difficulties in the birthing process. Three-dimensional printers have been around for several decades but advances in the technology mean it is now gaining in popularity in several fields. The machines work in a similar way to an inkjet printer, but instead of ink they deposit layers of material on top of each other, gradually building up the product they are making. Where traditional manufacturing only becomes efficient with economies of scale because of the need to produce moulds, 3D printing is capable of producing single copies of relatively complicated objects. The technology is not yet advanced enough to build telephones or computers but it is already used to make components. Source: Ananta-Tec
Read More........